top of page
Бетон Фасад

OUR POLYMERS

Own developments of Veselovsky Scientific Center for Macromolecular Compounds Chemistry.
If necessary, our specialists are ready to quickly create a new one  polymer  composition and develop technology to solve a non-standard problem.

SPRUT

Polymeric glue for repair of designs under water and in strongly aggressive environments. Creates protective underwater coatings resistant to strong acids.

  • has a high bonding  ability to carry out repair work on pipelines and other metal structures in  water;

  • can be applied at any water temperature and harden within a few minutes to several days;

  • allows to make high-strength connections by a fireless method;

  • very high resistance to medium and high concentrations of acids.

SILOR-ULTRA

Strengthening, waterproofing and dedusting of surfaces of porous materials, preparation of a surface for drawing decorative or protective coverings. Optimized for concrete and reinforced concrete structures.

  • impermeability to water, chlorides and salts;

  • resistance to aggressive environments;

  • increasing crack resistance;

  • increasing resistance to shock loads;

  • increasing of frost resistance;

  • is not toxic after polymerization.

SILOR-ULTRA KM (FOR CONCRETE)

Anti-vandal, protective coating for strengthening the surface layer, dedusting and waterproofing of concrete and reinforced concrete structures. Effective for any porous surfaces (wood, plaster, etc.).

  • strengthening the surface layer of concrete in 2-3 times;

  • increasing crack resistance;

  • increasing resistance to shock loads;

  • impermeability to water, chlorides and salts;

  • high resistance to aggressive environments of chemical and biological origin;

  • increasing of frost resistance;

  • the coating does not burn or smoke, is not toxic after polymerization;

  • can be applied to concrete with humidity up to 20%;

  • resistance of a covering in a wide range of temperatures;

  • excellent adhesion to most building materials.

SILOR-ULTRA KM (FOR METAL)

Anti-vandal soil for steel structures, which ensures their effective corrosion protection. Can be applied to moisture and a corroded surface.

  • impermeability to water, chlorides and salts;

  • high resistance to aggressive environments of chemical and biological origin

  • increasing of frost resistance;

  • the coating does not burn or smoke, is not toxic after polymerization;

  • coating stability in wide temperature range;

  • the treated surface is easily cleaned of any type of contaminants, including aerosol paints.

SILOR-ULTRA XC (FOR METAL)

Finishing anticorrosive coating of metal structures used in operation in aggressive environments. Chemical-resistant coating, resistant to UV exposure.

  • reliable protection against alkalis, acids, salt solutions and other aggressive liquids;

  • the coating can be operated even in strong acids;

  • resistant to ultraviolet radiation.

SILOR-ULTRA XC (FOR CONCRETE)

Finishing chemical resistance coating for concrete and reinforced concrete structures used in operation in aggressive environments.

  • reliable protection against alkalis, acids, salt solutions and other aggressive liquids;

  • the coating can be operated even in strong acids;

  • resistant to ultraviolet radiation.

SILOR-ULTRA FS

Protective hydrophobic coatings for concrete, brick, stone, plaster, wood. The coating reduces the ability of materials to moisten, while maintaining gas permeability, and provides increased resistance to ultraviolet light.

  • enhanced protection against ultraviolet radiation;

  • wide range of operating temperatures from -60 ºС to +120 ºС;

  • water absorption 0%;

  • provides anticorrosive protection;

  • resistance to mild aggression environment.

SILOR-ULTRA CL FUNGICIDE

Fungicide coatings (antiseptics) for application on concrete, wood, brick and plastered surfaces.

  • prevents soaking;

  • destroys fungal flora;

  • prevents the appearance of fungi, mosses, lichens, mold, termites;

  • can be applied for any porous materials.

SILOR-ULTRA UTKM

The polymer composition is used as a seamless liquid elastic waterproofing for porous surfaces (concrete, plaster, brick, foam blocks, etc.)

  • forms a seamless waterproofing;

  • high elasticity;

  • resistance to aggressive environments of chemical and biological origin;

  • increasing of frost resistance;

  • resistance to alternating and shock loads;

  • the coating is not toxic after polymerization, contact with drinking water and food is allowed;

  • availability and reliability of waterproofing of structures of complex configuration;

  • possibility of drawing and operating in a wide range of temperatures;

  • ease of use and durability.

SILOR-ELAST

Adhesive sealant for use in welded structures, prevents corrosion in welding location. Increased resistance to ultraviolet light.

  • good adhesion to all surfaces, which allows you to fasten and seal completely heterogeneous surfaces;

  • corrosion prevention influence on joints (welded, riveted, bolted);

  • damping of vibrations due to elastic fixing of connections;

  • sealing of hulls operated in sea and fresh water;

  • does not contain solvents and volatile components;

  • does not smell and has no harmful effects on human skin;

  • absolute safety in contact with drinking water and food.

SILOR-ULTRA G

It is used for sealing of cracks, fistulas of concrete and metal designs; sealing structural and expansion joints in constructions; sealing of interpanel joints of buildings, roofs, concrete floors, hydraulic structures, retaining walls, bridges, tunnels, airfields.

  • possibility of drawing and operating in a wide range of temperatures;

  • excellent adhesion to most building materials;

  • the adhesion of the sealant to concrete, metal and other building materials is higher than its cohesive strength;

  • possibility of carrying out works under water and in the environment of oil products;

  • resistance to climatic influences;

  • resistance to ultraviolet radiation;

  • resistance to fuel;

  • resistance to microorganisms;

  • does not contain solvents and volatile components;

  • does not smell and has no harmful effects on human skin;

  • absolute safety in contact with drinking water and food.

bottom of page